Re: [TR] low TR6 oil pressure - especially if you're using

[Dave1massey@cs.com]

In a message dated 5/8/2006 9:38:17 AM Central Standard Time, 
Brian_Lanoway@standardaero.com writes: 
> if you also happen to be using Castrol 20/50 oil (which
> I think most of us do): take the pressure relief valve out, clean it with
> lacquer thinner, put it back in and presto, the oil pressure should be 
> right.

Check the spring whist you are in there.  A broken spring can do the same or 
similar thing.

Dave


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org