I disc bolts to the hub so the holes you are seeing are for the disc to hub
attachment and not the wheel to hub mounting. These disc's do not slid over
the wheel studs as many newer car systems do.
JVV
----- Original Message -----
From: <zoboherald@aol.com>
To: <Lbc.Resto@comcast.net>; <triumphs@autox.team.net>
Sent: Monday, September 18, 2006 3:56 PM
Subject: Re: [TR] Early TR4 - Wheel Hubs
> -----Original Message-----
> From: Lbc.Resto@comcast.net
>
> What is the distance between the wheel stud centers?
>
> My car hubs are 4 = inches, yet the replacement discs that I just
> bought are only 4 inches. Grrrrgh.
>
> ==AM==
> It should be 4 1/2" if you're asking what I think you're asking!
>
> --Andy Mace
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|