triumphs
[Top] [All Lists]

Re: [TR] TR4 shackle length

To: <nwolf@u.washington.edu>, "Triumphs list" <triumphs@autox.team.net>
Subject: Re: [TR] TR4 shackle length
From: "THOMAS FANSHER" <tfansher@comcast.net>
Date: Tue, 2 Oct 2007 19:06:49 -0400
I just replaced mine and the car's not handy to measure but I think 3" is 
about right.
Certainly no longer.
I had the same bottoming problem with 185X15 on panasports. I replaced the 
rear springs and now no problem with rubbing and she handles a lot better, 
too.
Getting the bolts out of the silent blocks was a LONG process using heat and 
PB Blaster, but eventually they came - does 5 weeks sound like a long time? 
If you have any problems getting them out let me know. First hint, use a 
fine threaded stud in the bolt through the frame - that way you're putting 
pressure on the stud not the bolt you're trying to remove, and use grade 
eight washers for the leverage on a socket over the bolt. I went through 
about 6 or so studs during the process, but the threads in the bolt were 
still good.
Tom
----- Original Message ----- 
From: <nwolf@u.washington.edu>
To: <triumphs@autox.team.net>
Sent: Tuesday, October 02, 2007 6:49 PM
Subject: [TR] TR4 shackle length


> Hello Listers
>   Can anyone tell me the correct length (pin-to-pin) of a TR2-TR4 shackle? 
> I have a late TR4 with the deep-dish spring and big spacer under the axle, 
> but the shackle is supposed to be the same part from TR2 through TR4 (but 
> not TR4A).
>   Here is the back-story: The car sits about 2" lower in the rear than it 
> should, compared to other people's cars described in the Archives, and it 
> bottoms out occasionally.  The rear frame under the rear axle is about 
> 5.5" from the ground.  I have tall tires (Cooper Sportmaster 165/15), so I 
> know that's not the problem.
>   I suspect I have saggy springs.  But there is also a possibility that 
> the spring shackles are longer than normal... One of the previous owners 
> told me the car had been lowered that way long ago, though he thought he 
> had changed it back.
>   Anyway, my shackles measure right around 3", and I was just wondering if 
> this is correct.
>   Thanks!
> -Nick Wolf
> 64-ish TR4
> Vancouver, BC
> _______________________________________________
> tfansher@comcast.net
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
> Triumphs mailing list
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
_______________________________________________

This list supported in part by the Vintage Triumph Register
http://www.vtr.org

Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

<Prev in Thread] Current Thread [Next in Thread>