triumphs
[Top] [All Lists]

Re: [TR] TR3: firewall (forgive me)

To: "'Paul Dorsey'" <dorpaul@negia.net>, "'list Triumph'"
Subject: Re: [TR] TR3: firewall (forgive me)
From: "wbeech" <wbeech@flash.net>
Date: Sun, 7 Oct 2007 07:49:55 -0600
--===============0253554257==
Content-Type: text/plain; charset="windows-1250"
Content-Transfer-Encoding: 7bit

Assuming that your car in LHD.  Are you seeing the bolts for the blanking
plate for the master/clutch cylinder unit, if the car was to have been RHD
they would be over there? 

Bill B
'58 TR-3A TS/30766 L (rolling restoration)
"A bad day in your TR just gives you license to go shopping on-line again!"

-----Original Message-----
From: triumphs-bounces+wbeech=flash.net@autox.team.net
[mailto:triumphs-bounces+wbeech=flash.net@autox.team.net] On Behalf Of Paul
Dorsey
Sent: Sunday, October 07, 2007 7:17 AM
To: list Triumph
Subject: [TR] TR3: firewall (forgive me)

On my '60 TR3 (TS71318L)
What are the 4 nuts & bolts thru the firewall for that located above the
passenger's right foot?
The distance apart these captive nuts are maybe like the 4 corners of a post
card?  (do i need to say 'bulkhead'?)

Thanks, Paul
_______________________________________________
wbeech@flash.net

This list supported in part by the Vintage Triumph Register
http://www.vtr.org

Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

No virus found in this incoming message.
Version: 7.5.488 / Virus Database: 269.14.2/1053 - Release Date: 10/6/2007
10:18 AM
 

Version: 7.5.488 / Virus Database: 269.14.2/1053 - Release Date: 10/6/2007
10:18 AM

--===============0253554257==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

_______________________________________________

This list supported in part by the Vintage Triumph Register
http://www.vtr.org

Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

--===============0253554257==--

<Prev in Thread] Current Thread [Next in Thread>