Morning all,
here is a nice nurdy one; I ma wiring the central gauge panel in the
dash of my TR2, the wiring diagram shows the brown/blue (36) coming
from the A1 terminal on the control box to the A terminal on the
lighting switch, in my loom this is quite a heavy cable (having only
just connected it I do not want to disconnect to count the strands),
i.e not like lighting circuit, but more like those coming off the Amp
meter. There is a short link cable from the same A terminal on the
lighting switch going to the ignition switch, this is also brown/
blue, my question is does this cable need to be the same thickness,
rating as the one from the control box?.
P.S If I had realised how tight it all is behind the dash I might
have opted for no heater
Regards
John
1954 TR2
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|