A certain amount of movement is normal - I'd guess 5 - 10 degrees each way.
If more, it's either the nut at the bottom is loose or you have a broken
stator tube. If the tube is broken, I have several.
Andrew Uprichard
-----Original Message-----
From: triumphs-bounces+auprichard=comcast.net@autox.team.net
[mailto:triumphs-bounces+auprichard=comcast.net@autox.team.net] On Behalf Of
John Gillis
Sent: Sunday, October 14, 2007 3:28 PM
To: Triumph List
Subject: [TR] control head Q
Can anyone tell me why I can rotate the control head from side to
side on my TR2 project and it also moves when the steering wheel is
turned, I nipped up the three grub screws to no avail, it is so long
since I re-bulit the unit (5 years ago) I can't remember what locks
it in position.
Thanks in advance
John
1954 TR2
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|