Re: [TR] Push or pull

To:	<triumphs@autox.team.net>
Subject:	Re: [TR] Push or pull
From:	"Randall" <tr3driver@ca.rr.com>
Date:	Tue, 23 Oct 2007 20:53:40 -0700

> My adversary insisted 
> I was wrong and refused to discuss it further.  

Ask him if it matters which way a nut goes on a bolt.  Since the fan
effectively screws through the air, it's the same issue.

However, oddly enough, some fan makers do say to turn the blades around when
configuring as a pusher instead of a puller (in addition to reversing shaft
rotation by swapping the wires).  Apparently their fans are more efficient
when turning in a particular direction.

Randall
_______________________________________________

This list supported in part by the Vintage Triumph Register
http://www.vtr.org

Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

<Prev in Thread]	Current Thread	[Next in Thread>
Re: [TR] Push or Pull, (continued) Re: [TR] Push or Pull, MMoore8425 Re: [TR] Push or pull, MMoore8425 Re: [TR] Push or pull, John Macartney Re: [TR] Push or Pull, 60TR3A Re: [TR] Push or Pull, David Brister Re: [TR] Push or pull, Jim Muller Re: [TR] Push or pull, DLylis Re: [TR] Push or pull, Jim Muller Re: [TR] Push or pull, Nolan Re: [TR] Push or pull, DLylis Re: [TR] Push or pull, Randall <= Re: [TR] Push or pull, John Macartney Re: [TR] Push or pull, Nolan Re: [TR] Push or pull, DLylis Re: [TR] Push or pull, John Macartney Re: [TR] Push or pull, Dave1massey Re: [TR] Push or pull, Dave1massey Re: [TR] Push or pull, Michael Marr Re: [TR] Push or pull, Dave1massey Re: [TR] Push or pull, TeriAnn Wakeman Re: [TR] Push or pull, Jim Muller

Previous by Date:	[TR] build date of TR3A, Jim Wallace
Next by Date:	Re: [TR] authentic generator heat sheild on this TR4A?, Chris Buckley
Previous by Thread:	Re: [TR] Push or pull, DLylis
Next by Thread:	Re: [TR] Push or pull, John Macartney
Indexes:	[Date] [Thread] [Top] [All Lists]