> It's an original, (early) TR3 rear view mirror.
If so, it's badly damaged. The stem for a TR3 should be straight where
Oliver's photo shows a marked curve. The TR3 mirror mounts to a horizontal
surface (scuttle) and the mirror surface is adjustable above and below
vertical. The second photo makes it clear this is not the case with the
mirror shown; in fact the subject mirror can't be pulled up as far as
vertical.
But given that there are no other indications of damage, I think this is a
similar mirror from another application. Sorry, no idea which one.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|