Some time back I purchased the aluminum tank Jorge produces for my TR2. The
only deviation is that the indentations used to stiffen the tank are the
reverse of the original. Weight is around half.
Planning & Development Services
A. Daniel Cronin
248 761-2673
----- Original Message ----
From: Geo & Kathleen Hahn <ahwahnee@cybertrails.com>
To: Kinderlehrer <Kinderlehrer@comcast.net>; triumphs@autox.team.net
Sent: Monday, March 10, 2008 11:49:43 AM
Subject: Re: [TR] Aftermarket Moss Gas Tank TR3
FWIW -- I, too, was pleased with Jorge's work -- though in my case ti was a
bumper not a tank.
Geo
----- Original Message -----
From: "Kinderlehrer" <Kinderlehrer@comcast.net>
To: "Scott Suhring" <suhringtr36@comcast.net>; "Triumph Mail List"
<triumphs@autox.team.net>
Sent: Sunday, March 09, 2008 6:34 PM
Subject: Re: [TR] Aftermarket Moss Gas Tank TR3
> Scott,
> I didn't get the Moss fuel tank, but I did buy one from Jorge Cervera.
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as adcronin@ameritech.net
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|