If the timing is not correct the valves will interfere with the pistons.B So
basically if you've slipped a tooth or two you've likely smacked the piston(s)
against one or more valves.
Sent 3/20/2008 1:28:19 PM
To: "Triumph Mailing List" <Triumphs@Autox.team.net>
Subject: [TR] TR7 QuestionDoes anyone know if a slipped timing chain on a TR7
will bend the valves? or is there enough clearance for the motor to spin
without hitting anything.
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register