I've replaced brake pipes on my TR3A with a copper /nickel set.
I have one connection that won't seal. the pipe from the master
cylinder to
front union. Anything special with this connection or nifty
workarounds to share.
Bill Quincy
Wichita Kansas
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|