> The engine builder in our case, bored and installed a rear cam
> bearing. Moral? Do not take a Triumph engine to a chevy shop.
Not necessarily a Bad Thing, Don. Boring for bearing inserts is the only
way to save a TR6 block where the original cam bore is worn or damaged.
> But there is no rear cam bearing (shell) on a TR6.
Which is exactly why some of them do have rear cam bearings.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|