triumphs
[Top] [All Lists]

Re: [TR] tr3 question

To: triumphs@autox.team.net
Subject: Re: [TR] tr3 question
From: Bob <yellowtr@adelphia.net>
Date: Sun, 7 Sep 2008 15:27:08 -0400
On Sunday 07 September 2008 15:15:27 L1J1S@aol.com wrote:
> hey guys, talking to a buddy of mine who has a tr3-a. he just finished
> restoring his car, but has come across another chassis that he would like
> to switch out to put into his car. what would be entailed in doing so? i
> have  come up with disconnecting the brake/clutch lines, fuel line. harness
> into  engine compartment, speedo/tach cables, oil line to gauge. can anyone
> think of anything elas? also his body is beautiful, in attempting to remove
> the body from  the present chassis to fit onto the new chassis, do you
> think any structural damage will happen? also, what time frame is he
> looking at? larry  schwartz
>
Larry,

Add to your list, removing the engine / transmission which means removing the 
front apron, radiator, exhaust headpipe,  bumpers and braces, etc. Removing 
the steering column. Transmission cover, emergency brake.

Also as a precaution the body between the doors should be re-enforced before 
the body is lifted off the frame.

Then you have to go and remove all the body - frame bolts which means removing 
at least the seats and the carpets.

What is wrong with the current frame? Is it damaged, rusty? 

This is not usually attempted with a finished body. This is a major project 
and if the body is already completed the risk is large to some scratching or 
worse dents.

I would look for another car to restore that needs a good frame or try to sell 
the frame.

Bob
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>