On Sunday 14 December 2008 09:45:32 marty sukey wrote:
> Got the TR4A/TR250/TR6 frame back from the sandblasters this week and and
> getting ready to have at it. What have you folks used for frame paint that
> you have liked (or didn't like).
>
> Thanks,
> Marty
>
Marty,
I just got a frame paint kit from Eastwood for the 6 project as it was on
sale.
Here is a
link.http://www.eastwoodco.com/jump.jsp?itemID=23497&itemType=PRODUCT
I will use this paint on the 6 frame this spring after the sand blasting is
finished.
Sounds like a good product but since I havent tried it yet I cant say for sure
if it is worth the extra $.
In the past I have used rustoleum primer (red), (gray) and then the final coat
of glossy black.
So far that is working out ok but I dont drive in the snow and try to avoid
rain.
Both my 3 and 4 frames were sandblasted.
Bob
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|