I used the frame paint kit from Eastwood that Bob mentions. I found it to
be very easy to apply and very durable.
Rod Trunnell
62 TR3B TCF1037l
--------------------------------------------------
From: "Bob" <yellowtr@adelphia.net>
Sent: Sunday, December 14, 2008 7:51 AM
To: <triumphs@autox.team.net>
Subject: Re: [TR] Frame Paint
> On Sunday 14 December 2008 09:45:32 marty sukey wrote:
>> Got the TR4A/TR250/TR6 frame back from the sandblasters this week and and
>> getting ready to have at it. What have you folks used for frame paint
>> that
>> you have liked (or didn't like).
>>
>> Thanks,
>> Marty
>>
> Marty,
>
> I just got a frame paint kit from Eastwood for the 6 project as it was on
> sale.
>
> Here is a
> link.http://www.eastwoodco.com/jump.jsp?itemID=23497&itemType=PRODUCT
>
> I will use this paint on the 6 frame this spring after the sand blasting
> is
> finished.
>
> Sounds like a good product but since I havent tried it yet I cant say for
> sure
> if it is worth the extra $.
>
> In the past I have used rustoleum primer (red), (gray) and then the final
> coat
> of glossy black.
>
> So far that is working out ok but I dont drive in the snow and try to
> avoid
> rain.
>
> Both my 3 and 4 frames were sandblasted.
>
> Bob
> _______________________________________________
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|