Alot of my questions are retorical. me searching for wrongness. At some
point I'm sure I'''ve asked, 'What happens when one changes their oil too
much?'
paul
----- Original Message -----
From: "Randall" <tr3driver@ca.rr.com>
To: "'list Triumph'" <triumphs@autox.team.net>
Sent: Sunday, December 14, 2008 12:44 PM
Subject: Re: [TR] NO Graphite for stator tube wiring
>> Why can't this be done without graphite or
>> any other form of lubrication?
>
> Paul, we all have differing opinions and experiences on the best way to
> accomplish various tasks. I don't think anyone can ever say "This is
> absolutely the only possible way to do this" or even with any certainty
> that
> any particular method is the "best" way.
>
> Personally, I've never seen any need for lubricant when pulling the
> harness
> through the stator tube; but then my harness and tube are likely not quite
> identical to Andy's. If his is tighter, some lube might help.
>
> At any rate, a little graphite isn't going to harm anything.
>
> Randall
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as dorpaul@bellsouth.net
>
> http://www.team.net/archive
--
I am using the free version of SPAMfighter.
We are a community of 5.7 million users fighting spam.
SPAMfighter has removed 947 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfighter.com/len
The Professional version does not have this message
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|