triumphs
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [TR] drill bits

from [Dave1massey] [Permanent Link][Original]
To: triumphs@autox.team.net
Subject: Re: [TR] drill bits
From: Dave1massey@cs.com
Date: Fri, 19 Dec 2008 12:44:02 EST 
In a message dated 12/19/2008 8:02:17 AM Central Standard Time, 
lbc.resto@verizon.net writes: 
> "Low speed, plenty of feed" was the mantra we were taught back in the day.
> 
And if you use a smaller (read cheaper) drill bit to drill a pilot hole your 
larger (read more expensive) bits will last pretty much forever.

Dave
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [TR] drill bits, pethier
Next by Date:  Re: [TR] drill bits, Dave1massey
Previous by Thread:  Re: [TR] drill bits, pethier
Next by Thread:  Re: [TR] drill bits, Dave1massey
Indexes:  [Date] [Thread] [Top] [All Lists]