Doug,
That's good to hear. Since installing the Nissan dif last winter, all new
u-joints and cleaning and repacking my old axles, I fought a clunk all year.
I've now got Goodparts' CVJs and upgraded hubs waiting to be installed. I
hope I get the same results that you did!
Bob
Bob Danielson
1975 TR6
Running with TBI, Toyota 5 speed &
Nissan differential
----- Original Message -----
From: "dmnlaw" <dmnlaw@peoplepc.com>
To: <triumphs@autox.team.net>
Sent: Sunday, December 28, 2008 9:00 PM
Subject: [TR] No More Clunking
> Just replaced my stock axles and hubs with new units produced by Richard
> Good. The stock units that I removed were in good condition including
> u-joints. Despite their condition I still had a lot of clunking. With the
> new units I have no clunking . . . much to my delight. In the past there
> has been a lot of discussion regarding "clunking culprits." My clunking
> with the stock units was no doubt coming from the spline joints; a little
> wear has the potential to result in a lot of clunking. Just thought I
> would post this experience for those trying to cure the clunk problem.
>
> Doug Nelson
> 74TR6
>
> ________________________________________
> PeoplePC Online
> A better way to Internet
> http://www.peoplepc.com
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as 75tr6@tr6.danielsonfamily.org
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|