Hello List,
Well, the good news is that I got my '58 body and chassis back from the shop
after 15 months and it looks terrific! So, I started first to install the
fuel system starting with the gas tank. After wrestling with the tank and
fuel lines all the way up to the fuel pump I was feeling pretty good and
figured putting the fuel inlet hose and cap on would be a good finish for
the day.
Well, I am not seeing how this short hose and threaded sleeve will go on
under the rear deck... and I don't recall how it came off. As tight as the
tank was to maneuver into position I can't think that it would go on before
the tank was installed. Can someone help with the proper sequence of events
for this? As much as I would hate to have to take the tank out again, if I
must, I must,
Thanks in advance,
*
Bill B
*
'58 TR-3A TS/30766 L
*
'59 TR-3A TS/64974 LO
*
"A Triumph is man's best friend, it always comes when it is
called...of course, some times it is difficult to make it go"
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|