triumphs
[Top] [All Lists]

Re: [TR] TR3 gas tank... Say it ain't so

To: wbeech@flash.net, triumphs@autox.team.net
Subject: Re: [TR] TR3 gas tank... Say it ain't so
From: DLylis@aol.com
Date: Sun, 19 Apr 2009 07:44:03 EDT
You must loosen the tank so that you can move it and tip it, but I don't  
think completely remove it.  At least I didn't have to.  Having said  that, I 
found that the hose portion was too long and put way too much pressure  on 
the rear deck.  I assembled it all without the hose and got a measure of  
proper length so as to fit it with adequate amount for clamping.  
I think it was hose on tank, tank in place, then filler assembly.   Moving 
the tank in place with the hose on it required a bit of distortion to the  
hose until it got into place.  Be careful of crud falling into the tank  when 
doing this.
David  Lylis
69 TR6 CC26160L
60 TR3A TS74461LO
**************A Good Credit Score is 700 or Above. See yours in just 2 easy 
steps! 
(http://pr.atwola.com/promoclk/100126575x1220814852x1201410738/aol?redir=http:%2F%2Fwww.freecreditreport.com%2Fpm%2Fdefault.aspx%3Fsc%3D668072%26
hmpgID%3D62%26bcd%3DAprilfooter419NO62)
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>