Randall,
I remember reading a post from you where you told about rebuilding your
fuel shut off valve. I haven't been able to find it again by searching
the archives. The packing in the valve on my 57 TR3 is as hard as a
rock. I have considered using a short section of fuel hose that is the
proper OD as a replacement, but I seem to remember you saying something
about using o-rings. What exactly was it that you did as a repair?
Thanks,
Mike
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|