I know it is difficult for the folks on this list to express their
opinions on a subject, but I will ask anyway ...
1957 TR3 two blown head gaskets in one year. 87mm pistons (Ken
Gillanders), Moss 87 mm head gasket used. Head magnafluxed (siq),
lightly plained. I notice Moss now sells a copper head gasket, and a
steel head gasket, not sure if they are for 87mm. That is pretty much
the background.
What have I missed? What gasket is the BEST?? Please don't be shy ...
--
"Thinking is the hardest work there is. That's why so few people
undertake it." - Henry Ford
Bill Pugh
1957 TR3
"Casper"
TS16765L
Wallace, CA
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|