>I have rebushed my rockers
Terry,
That was the use of the "Royal I". My reamers are not what I would
consider engine rebuild grade so I took the rockers off to a specialty machine
shop used by the local professional restorers to have the rockers rebushed and
reamed to the new shaft, as well as the tips reground. Other than that it
is pretty straight assembly.
I emailed back to Randall that I let it cool overnight and set the valves
to loose .11, tight .12, etc and torqued all the jam nuts to 20 lbs and so
far, so good.
Thanks
David
David Lylis
69 TR6 CC26160L
60 TR3A TS74461LO
**************An Excellent Credit Score is 750. See Yours in Just 2 Easy
Steps!
(http://pr.atwola.com/promoclk/100126575x1221621499x1201450105/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072&hmpgID=62&bcd=Apr
ilExcScore428NO62)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|