Has anyone done destructive testing on a steel stud in aluminum trailing
arm? I am curious if the torque necessary to pull a steel stud out of a
'known to be good' application has been determined.
This bit of engineering has to go into the "What Were They Thinking?" Hall
of Fame. Why this was not designed to accommodate a through bolt is beyond
me.
David Lylis
69 TR6 CC26160L
60 TR3A TS74461LO
**************Big savings on Dell XPS Laptops and
Desktops!(http://pr.atwola.com/promoclk/100126575x1219491521x1201306563/aol?redir=http:%2F%2Fad.double
click.net%2Fclk%3B214102108%3B35952091%3Bs)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|