http://www.geocities.com/hollywood/theater/3622/mk3-wiring-variant.gif
Which clearly shows unplugging the "brake line failure switch" or PDWA will
not affect the oil pressure light.
----- Original Message -----
From: "Randall" <tr3driver@ca.rr.com>
To: <triumphs@autox.team.net>
Sent: Thursday, April 30, 2009 11:50 AM
Subject: Re: [TR] Master Cylinder help part II - PDWA
> If you find a GT6 wiring diagram that shows the PDWA, I would like to have
> a
> copy. My early GT6 factory manual mentions the PDWA, but the only wiring
> diagrams given do not show it.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|
