Since he already indicated that he had removed the pushrod, I didn't think
it was necessary to repeat that part.
Joe
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of jimmuller@rcn.com
Sent: Thursday, July 09, 2009 1:49 PM
To: Triumphs@autox.team.net
Subject: Re: [TR] Newbie
Joe "Fluif" Curry wrote:
> I have found that the best way to get a stuck piston
> out is to bang it gingerly on a block of wood until...
That's what I've done. Just to fill in the dumb things that some of us
forget occasionally (and I ain't sayin' who), you must first remove the
circlip which holds the piston in the cylinder.
--
Jim Muller, and it wasn't me
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as spitlist@cox.net
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|