> I do have one blocking issue however, which is that my
> drivers side rear
> mounting point where the lever link arm goes is oval shaped
Just a thought, Tom, you could probably have a local welding shop weld up
the hole and then re-drill it.
Or, drill/ream it oversize and install a sleeve. Most hobby shops carry
thin-wall tubing that can be cut to length for a sleeve.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|