Could you (or a machine shop) weld in the oval areas and re-drill to the
proper dim.?
Regards,
Dan Cronin
--- On Mon, 9/14/09, Tom Deutsch <tdskip@yahoo.com> wrote:
From: Tom Deutsch <tdskip@yahoo.com>
Subject: [TR] TR4a solid axle mounting point - need to find one.
To: triumphs@autox.team.net
Date: Monday, September 14, 2009, 8:16 PM
Hi guys - hope everyone is doing well. So having learn a ton the hard way,
and
through the efforts of a number of the folks on the list here (Randall, Bob,
Geo and many others) I think I've learned enough to get the TR4a back on the
road over the winter.
I do have one blocking issue however, which is that my drivers side rear
mounting point where the lever link arm goes is oval shaped and it makes for
some funky (fun, but not too safe) unidirectional oversteer. Whee....
Any chance someone has a drivers side mounting point for the rear suspension,
#59 in the Moss diagram below, in good shape?
[img]http://mossmotors.com/Graphics/Products/Schematics/TRI-031.gif[/img]
More than happy to pay a fair price. Thanks!
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|
