I made one up out of high tensile threaded rod, large washers and two nuts
each end.
I've used it at least alot and its as good as when I made it up.
I need to repair a front fender and was thinking of locating a TR6 fender
(as TR4 fenders are as rare as) and making one out of two.
Do others agree with me that the major difference between a 4's fender and a
6's is the front and that the bottom part below the suage (fold above the
wheel arch) is the same.
Jim and the TR4
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|