triumphs
[Top] [All Lists]

Re: [TR] Valve Cover

To: terryrs@comcast.net
Subject: Re: [TR] Valve Cover
From: "Kurtis J." <tr4driver@gmail.com>
Date: Thu, 15 Apr 2010 20:57:56 -0500
Terry,

I believe the TR3 valve cover is the same size as the TR4, but the oil
filler is on the opposite end.  I actually have a TR3 valve cover that
I don't need and would gladly send you if you want it.  It's not in
the best shape in the world, but I suspect it could be cleaned up and
re-chromed.

--
Kurtis
Russellville, Arkansas
1963 TR4 - CT19389L
1959 AH Bugeye - AN5L23250
www.vintagebritishcars.com

On Thu, Apr 15, 2010 at 4:59 PM,  <terryrs@comcast.net> wrote:
> This is almost too elementary to be possible.  Which is why, of course, it
mystifies me!
>
> Chasing the oil leak on the TR3A, I had advice from the list about the
potential for distortion of the valve cover.  Particularly likely since I
bought it used off E-Bay years ago and it's not correct.  It has one of those
threaded holes for the evacuation hose that must go to the intake for
reburning, but which I plugged with a ss bolt.
>
> Anyway, today I felt the edges for the first time and find it overlaps the
head surface on the dizzy side by three-eights, maybe more, meaning the Justin
Wagner seal only partially contacts the head surface.  I don't know if it's
fixable.
>
> Two questions:
>
> 1)  Is the 3 valve cover narrower than the 4 (or could it be an MGB,
something like that?)?
>
> 2)  Wife gave me a pressure washer a couple of Christmases ago.  Any
recommendations on the soap to use?  Cascade dishwasher?  Carwash?
>
> As usual, thanks everyone!
>
> Terry Smith, '59 TR3A
> New Hampshire

_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>