Re: [TR] TR2 stuck rings update - appears that AC Delco product

["Randall" <tr3driver@ca.rr.com>]

> Oil pressure at speed is 70 psi - is that too high? - at idle - 45 psi.

Nope, that's just perfect.

Congratulations on getting it running!

BTW, the 'correct' setting for the valves depends on whether you have
aluminum or cast iron rocker shaft pedestals.  I believe a TR2 would have
originally had the cast iron pedestals, but they were a factory-approved
retrofit to the earlier engines so there is some chance they have been
changed.

-- Randall 


triumphs@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums