[TR] TR2 stuck rings update - appears that AC Delco product works

[tr3driver at ca.rr.com (Randall)]

> Oil pressure at speed is 70 psi - is that too high? - at idle - 45 psi.

Nope, that's just perfect.

Congratulations on getting it running!

BTW, the 'correct' setting for the valves depends on whether you have
aluminum or cast iron rocker shaft pedestals.  I believe a TR2 would have
originally had the cast iron pedestals, but they were a factory-approved
retrofit to the earlier engines so there is some chance they have been
changed.

-- Randall