Re: [TR] Post motor rebuild re-torque

[terryrs@comcast.net]

>What is the correct re-torquing method - back off the nut and re-tighten 
>to spec or just tighten to spec?

Just to add to what others have said, I've finally found that the Head nuts 
that are outside the valve cover are dry as a bone, while those inside are 
nicely oiled.  Backing off the "outside" nuts, then retorquing always finished 
with a screeching sound (I think Randal had a name for it).  This last time, I 
oiled the studs outside so that they would be equally oiled as the studs inside 
and so they would torque evenly.  Probably unnecessary, but I seemed to feel 
like I got a more accurate torquing of the normally "dry" outside studs.

Terry Smith, 1959 TR3A
New Hampshire

** triumphs@autox.team.net **

Archive: http://www.team.net/archive