triumphs
[Top] [All Lists]

Re: [TR] Nexen tires for a TR3A

To: "'Kinderlehrer'" <kinderlehrer@comcast.net>, <triumphs@autox.team.net>
Subject: Re: [TR] Nexen tires for a TR3A
From: "CFM-TR" <cfmtr3a@verizon.net>
Date: Fri, 31 May 2019 14:35:24 -0400
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
Organization: Musson
References: <9caba7dc27955d4c0578025ab5adf13c@mail.gmail.com> <45169D326FA442D893E46EA557139B64@RYPC> <3c7adb156b86225de273049cde412ac5@mail.gmail.com> <0FE483ED97B5459085043FB55F4DA6AB@RYPC> <005e01d517da$7f59f950$7e0debf0$@net>
Thread-index: AQJHAZkukN1V3dwchQ9cQPiN2SYcowFFfQTVAThjG0kBn5mzcwHR1OPspXJAMdA=
Have the Nexen's; replaced 10 year old Dunlops (because of sidewall
cracking) about 3 years ago.  Very similar tread design.  Don't run many
miles so can't tell you about longevity.  Minimal lead to balance tires.  In
fact, one didn't require any.  I don't know if I believe it but the old guy
that did the balancing said that many times it is the wheel (either wire or
steel or even mag repro's) that cause the balancing problems.  Many times
you can move the tire on the wheel 1/8 or 1/4 turn at a time and eliminate
the issue.

Carl 
1960 Triumph TR3
TS81802LO
Tampa, FL



-----Original Message-----
From: Triumphs [mailto:triumphs-bounces@autox.team.net] On Behalf Of
Kinderlehrer
Sent: Friday, May 31, 2019 1:59 PM
To: triumphs@autox.team.net
Subject: [TR] Nexen tires for a TR3A

Anyone have any experience with the Nexen tire (SB802)? There are very few
tire stores around here that can still mount a tire on a wire wheel and the
only tire they seem to be able to get in a 165/80-15 is the Nexen. If I go
with a wider tire, will I have a problem with rubbing and will the steering
be even harder? 

Thanks,
Bob

** triumphs@autox.team.net **

Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

http://autox.team.net/mailman/options/triumphs/cfmtr3a@verizon.net

** triumphs@autox.team.net **

Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>