Search String: Display: Description: Sort:

Results:

References: [ +from:jmsdarch@sbcglobal.net: 365 ]

Total 365 documents matching your query.

221. Re: [Healeys] O-rings, etc,. (score: 1)
Author: john spaur <jmsdarch@sbcglobal.net>
Date: Fri, 12 Nov 2010 23:56:33 -0800
Speaking of Viton. Last night I went to a local bar for some food and drink and overheard a man from the Burke Rubber Company (big name) talking about rubber. I talked with him and he mentioned that,
/html/healeys/2010-11/msg00364.html (7,578 bytes)

222. [Healeys] Axle casing powder coat (score: 1)
Author: john spaur <jmsdarch@sbcglobal.net>
Date: Fri, 26 Nov 2010 19:10:01 -0800
Does anyone have experience with powder coating the axle casing. I am wondering if it will warp and cause problems with the differential seal? Same issue with the axle bearing hub assembly. Should I
/html/healeys/2010-11/msg00617.html (6,982 bytes)

223. [Healeys] Odd issue with axle case (score: 1)
Author: john spaur <jmsdarch@sbcglobal.net>
Date: Fri, 26 Nov 2010 19:22:44 -0800
As I was removing the axle bearing hub retaining nut I noticed that the nut on the right side was further in that the nut on the left side. It was about 1/4" There were no missing parts and the beari
/html/healeys/2010-11/msg00618.html (6,483 bytes)

224. [Healeys] brake disc rust inhibitor (score: 1)
Author: john spaur <jmsdarch@sbcglobal.net>
Date: Sat, 27 Nov 2010 11:03:22 -0800
I found a little information on the web but I am wondering: Does anyone know of a product, and where to find it, to inhibit rust on the brake discs and drums during a prolonged restoration? I just ne
/html/healeys/2010-11/msg00624.html (7,366 bytes)

225. [Healeys] Bead blasting gasket surfaces (score: 1)
Author: john spaur <jmsdarch@sbcglobal.net>
Date: Sat, 27 Nov 2010 11:05:18 -0800
Would using 80 grit glass media to clean metal gasket mating surfaces, such as the rear hub bearing retainer, harm them and stop them from mating properly? Thanks for your help! John Spaur __________
/html/healeys/2010-11/msg00625.html (6,788 bytes)

226. [Healeys] Axle - pan hard bushing? (score: 1)
Author: john spaur <jmsdarch@sbcglobal.net>
Date: Sat, 27 Nov 2010 16:14:43 -0800
On top of the differential housing for my /62 BT7 there is a welded sheet metal eye. I believe it is for a rubber bushing that the pan hard rod passes through. Is this eye round or oblong?. Mine is o
/html/healeys/2010-11/msg00636.html (7,510 bytes)

227. Re: [Healeys] Axle - pan hard bushing? (score: 1)
Author: john spaur <jmsdarch@sbcglobal.net>
Date: Sun, 28 Nov 2010 10:51:58 -0800
Oops, I got the location and part wrong. It is on the diff backside and for the hand brake. Thanks to everyone for helping me! John _______________________________________________ Healeys@autox.team.
/html/healeys/2010-11/msg00655.html (7,879 bytes)

228. Re: [Healeys] Odd issue with axle case (score: 1)
Author: john spaur <jmsdarch@sbcglobal.net>
Date: Sun, 28 Nov 2010 10:57:03 -0800
I don't have any problem that I know of or that is apparent. The nut was just not positioned the same as the other side. Several people stated that the threads are cut differently; which I presume to
/html/healeys/2010-11/msg00656.html (8,665 bytes)

229. Re: [Healeys] Ah, the rivet...and the Assumptions Within (score: 1)
Author: john spaur <jmsdarch@sbcglobal.net>
Date: Thu, 09 Dec 2010 20:19:45 -0800
I know I am late on this; been busy. '62 BT7 - both rims have rivets one with and one without a clip, no dimples. The flange that faces the headlight bucket on the rim with a clip is flatter than the
/html/healeys/2010-12/msg00191.html (8,686 bytes)

230. Re: [Healeys] aluminum surround screws (score: 1)
Author: john spaur <jmsdarch@sbcglobal.net>
Date: Wed, 15 Dec 2010 20:03:22 -0800
3/16 x 3/4" according to the parts book (RPP0312) They are 10-32 chromed Phillips oval head screws with a cone point and with circular markings on the head. Regards, John ___________________________
/html/healeys/2010-12/msg00389.html (7,230 bytes)

231. [Healeys] Leaf spring interleaves (score: 1)
Author: john spaur <jmsdarch@sbcglobal.net>
Date: Thu, 16 Dec 2010 08:54:24 -0800
Does anyone know the correct thickness for the zinc interleaves? I mic .027 to .030. Both thickness appear to be available on the market. Thank you, John _____________________________________________
/html/healeys/2010-12/msg00398.html (6,792 bytes)

232. Re: [Healeys] Leaf spring interleaves (score: 1)
Author: john spaur <jmsdarch@sbcglobal.net>
Date: Thu, 16 Dec 2010 22:31:13 -0800
Good to know, thank you Ken! I ordered .027 and .030 in 12"x39" sheets from RotoMetals. Mix and match. I will use the leftovers for zinc plating. John _______________________________________________
/html/healeys/2010-12/msg00401.html (7,565 bytes)

233. [Healeys] Brake part color (score: 1)
Author: john spaur <jmsdarch@sbcglobal.net>
Date: Mon, 20 Dec 2010 08:57:19 -0800
There is a lever inside of the rear brake drum that is part of the parking brake assembly. Should it be zinc plated or painted silver? Mine was silver but I may have painted it earlier in this decade
/html/healeys/2010-12/msg00460.html (6,788 bytes)

234. Re: [Healeys] Air Intake Assembly Diameter (score: 1)
Author: john spaur <jmsdarch@sbcglobal.net>
Date: Mon, 20 Dec 2010 09:24:13 -0800
At the firewall it is 3-13/16. The one at the front flapper appears to be 3-7/8". John _______________________________________________ Healeys@autox.team.net Donate: http://www.team.net/donate.html S
/html/healeys/2010-12/msg00461.html (7,610 bytes)

235. Re: [Healeys] Part question (score: 1)
Author: john spaur <jmsdarch@sbcglobal.net>
Date: Wed, 22 Dec 2010 09:05:49 -0800
Hi David, Have you had a chance to check on this? John _______________________________________________ Healeys@autox.team.net Donate: http://www.team.net/donate.html Suggested annual donation $12.75
/html/healeys/2010-12/msg00502.html (7,090 bytes)

236. [Healeys] Handbrake lever - painted or plated (score: 1)
Author: john spaur <jmsdarch@sbcglobal.net>
Date: Wed, 22 Dec 2010 09:11:16 -0800
I thought I would try again to find the answer to this. On the back of the rear drum backing plates a lever sticks out that is connected to the hand brake cross rod. Is the lever zinc plated or paint
/html/healeys/2010-12/msg00503.html (7,233 bytes)

237. Re: [Healeys] BJ7 brakes, front suspension (score: 1)
Author: john spaur <jmsdarch@sbcglobal.net>
Date: Mon, 27 Dec 2010 20:52:21 -0800
Good to know this! _______________________________________________ Healeys@autox.team.net Donate: http://www.team.net/donate.html Suggested annual donation $12.75 Archive: http://www.team.net/archive
/html/healeys/2010-12/msg00568.html (7,386 bytes)

238. Re: [Healeys] Tool Black ? (score: 1)
Author: john spaur <jmsdarch@sbcglobal.net>
Date: Fri, 31 Dec 2010 09:48:23 -0800
I am using Caswell's black chromate on small parts.You need to zinc plate the part first. The research I have done on gun blueing show there is a hot and cold process. The cold blueing is not very du
/html/healeys/2010-12/msg00661.html (7,450 bytes)

239. [Healeys] Pumpkin Finish (score: 1)
Author: john spaur <jmsdarch@sbcglobal.net>
Date: Tue, 04 Jan 2011 09:09:33 -0800
How are people finishing the outside of the differential housing? Are you buffing it and then coating it with clear paint, or just buffing it. Thank you, John Spaur '62 BT7 __________________________
/html/healeys/2011-01/msg00062.html (6,863 bytes)

240. Re: [Healeys] Pumpkin Finish (score: 1)
Author: john spaur <jmsdarch@sbcglobal.net>
Date: Tue, 04 Jan 2011 19:41:22 -0800
Thank you Wilko! Most of the pictures I see show the differential housing in a natural cast finish. The originality guidelines do not mention a finish with the exception of one photo showing a black
/html/healeys/2011-01/msg00077.html (7,089 bytes)

Current List: 221 - 240
Page: [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19]
This search system is powered by Namazu