- 1. [Healeys] BJ7 top and dash support (score: 1)
- Author: Frank Edwards <logical2@hotmail.com>
- Date: Wed, 10 Mar 2010 00:17:14 +0000
- I am assembling my BJ7 and I have a piece marked "dash support" I belive I see where the front end goes but where does the dash end attach to the dash? I replace the sills on my car and I now have no
- /html/healeys/2010-03/msg00168.html (7,644 bytes)
- 2. Re: [Healeys] BJ7 top and dash support (score: 1)
- Author: Alan Seigrist <healey.nut@gmail.com>
- Date: Wed, 10 Mar 2010 09:30:15 +0800
- If those dash pieces are like the BJ8 (do they attach to the front?) they should be little metal strips which simply wrap around the front lip of the dash-scuttle, which holds the dash down to the s
- /html/healeys/2010-03/msg00170.html (8,985 bytes)
- 3. Re: [Healeys] BJ7 top and dash support (score: 1)
- Author: "Rich C" <richchrysler@quickclic.net>
- Date: Tue, 9 Mar 2010 21:25:34 -0500
- Hello Frank, There will be a mounting hole just to the right of the steering column (LHD car) and along the bottom of the dash, to the immediate left of the instrument illumination slide switch, wher
- /html/healeys/2010-03/msg00171.html (9,272 bytes)
- 4. Re: [Healeys] BJ7 top and dash support (score: 1)
- Author: KENNETH MASON <medition@verizon.net>
- Date: Sun, 28 Nov 2010 19:48:45 +0000
- If the dash support bracket in question is a long bracket , about 1/2 inch wide with formed ends....it mounts between the air duct that crosses the firewall and connects to the dash just to the left
- /html/healeys/2010-11/msg00658.html (8,737 bytes)
- 5. Re: [Healeys] BJ7 top and dash support (score: 1)
- Author: Michael Salter <msalter@precisionsportscar.com>
- Date: Sun, 28 Nov 2010 18:01:14 -0500
- As I recall the dash end of that bracket is secured to the dash with a 10/32 screw near the center of the bottom lip. Someone may correct me on that. The lower end of the top assist springs are hooke
- /html/healeys/2010-11/msg00664.html (8,205 bytes)
This search system is powered by
Namazu