- 1. [Healeys] Center shift trans selector (score: 1)
- Author: tld6008@mchsi.com
- Date: Mon, 22 Sep 2008 19:03:46 +0000
- I have an engine and centershift transmission hanging on a lift to pull out together and I cant get the shift lever out of the transmission. Pulled off the circlip and spring but the lever won't pul
- /html/healeys/2008-09/msg00485.html (7,158 bytes)
- 2. Re: [Healeys] Center shift trans selector (score: 1)
- Author: "Randy Dickson" <rdickson@midwestarchaeology.com>
- Date: Mon, 22 Sep 2008 14:35:05 -0500
- Did you undo the two 7/16 bolts that hold the lever in? They fit into the vertical grooves in the ball of the shifter. They are at 3 and 9 o'clock if you are looking straight down on the gearbox. Ra
- /html/healeys/2008-09/msg00486.html (8,372 bytes)
- 3. Re: [Healeys] Center shift trans selector (score: 1)
- Author: "Peter Schauss" <schauss@worldnet.att.net>
- Date: Mon, 22 Sep 2008 16:42:45 -0400
- You need to remove the two roll pins which hold the ball in from each side. HTH, Peter Schauss 1963 BJ7 1980 MGB _______________________________________________ Support Team.Net http://www.team.net/d
- /html/healeys/2008-09/msg00491.html (8,517 bytes)
- 4. Re: [Healeys] Center shift trans selector (score: 1)
- Author: tld6008@mchsi.com
- Date: Mon, 22 Sep 2008 21:08:17 +0000
- I got it off by taking the top cover off, gave me a lot of extra clearance that way also. Didn't see the bolts you reffered to mine has 2 roll pins that I found out need to be driven into the grooves
- /html/healeys/2008-09/msg00493.html (7,779 bytes)
This search system is powered by
Namazu