- 1. [Healeys] Rear Hub Issue (score: 1)
- Author: "Elton Schulz" <eschulz@frontiernet.net>
- Date: Sun, 27 Dec 2009 09:59:00 -0500
- Fellow Listers, In replacing the bearings in the rear hubs, the workshop manual states that "the outer face of the bearing spacer should protrude from .001" to .004" beyond the outer face of the hub
- /html/healeys/2009-12/msg00813.html (6,686 bytes)
- 2. Re: [Healeys] Rear Hub Issue (score: 1)
- Author: Awgertoo@aol.com
- Date: Sun, 27 Dec 2009 17:59:43 EST
- "the outer face of the bearing spacer should protrude from .001" to .004" beyond the outer face of the hub AND THE PAPER WASHER when the bearing is pressed into position." -- Elton-- The flange on th
- /html/healeys/2009-12/msg00818.html (7,317 bytes)
- 3. Re: [Healeys] Rear Hub Issue (score: 1)
- Author: richard mayor <mayorrichard@hotmail.com>
- Date: Tue, 29 Dec 2009 03:44:12 +0000
- The bearing spacer must stand proud a few thousands in order for the axle flange to pinch the outer race of hub bearing and hold it tight. Otherwise the outer race of the bearing will begin to turn a
- /html/healeys/2009-12/msg00858.html (8,974 bytes)
This search system is powered by
Namazu