- 1. [Healeys] Short rubber strap (score: 1)
- Author: Charlie Frazer <cfrazer@jcomm.uoregon.edu>
- Date: Thu, 3 Apr 2008 21:51:47 -0700
- According to the originality guidelines, the 3000 cars had an odd-shaped, 4 rubber strap used to secure the capillary tube to either the heater hose or to the breather hose between the engine block
- /html/healeys/2008-04/msg00061.html (7,176 bytes)
- 2. Re: [Healeys] Short rubber strap (score: 1)
- Author: scotyp@comcast.net
- Date: Fri, 04 Apr 2008 06:08:33 +0000
- The rubber strap holds the capillary tube to the heater hose. The tube is wound 3 times in about a 2 inch diameter coil and is gathered and attached to the hose. I don't know about 2 holes. Perhaps
- /html/healeys/2008-04/msg00062.html (7,884 bytes)
- 3. Re: [Healeys] Short rubber strap (score: 1)
- Author: "Mark and Kathy" <mgtrcars@galaxyinternet.net>
- Date: Fri, 4 Apr 2008 20:29:56 -0400
- If you haven't caught this yet. Our Healey Guru himself was nice enough to "actual size" picture of this strap in his Tech Talk manual. And this can easily be made from an old inner tube that I'm sur
- /html/healeys/2008-04/msg00080.html (8,161 bytes)
- 4. Re: [Healeys] Short rubber strap (score: 1)
- Author: rrengineer@dslextreme.com
- Date: Fri, 4 Apr 2008 18:24:03 -0700 (PDT)
- If this is the "John Bull" strap that has the "T" end on it that goes through the hole, then I believe that Clarke Spares sells a nice repro. I use one to locate the choke cable to one of the heater
- /html/healeys/2008-04/msg00081.html (8,532 bytes)
- 5. Re: [Healeys] Short rubber strap (score: 1)
- Author: Charlie Frazer <cfrazer@jcomm.uoregon.edu>
- Date: Fri, 4 Apr 2008 23:38:33 -0700
- Everything I needed to know. Thanks to Norman, Mark, Gary and Scott Charlie If you haven't caught this yet. Our Healey Guru himself was nice enough to add an "actual size" picture of this strap in h
- /html/healeys/2008-04/msg00087.html (8,226 bytes)
- 6. Re: [Healeys] Short rubber strap (score: 1)
- Author: "Mirek and Gwen Sharp" <m.g.sharp@sympatico.ca>
- Date: Sat, 5 Apr 2008 10:57:46 -0400
- You wrote: How are the two holes used? One hole must accept the T-shaped end. What s the other one for? These straps, originally made by John Bull, were made for the motocycle industry to secure cab
- /html/healeys/2008-04/msg00100.html (8,361 bytes)
This search system is powered by
Namazu