- 1. [Healeys] Windshield to cowl gasget - BJ8 (score: 1)
- Author: HealeyBJ7@aol.com
- Date: Sun, 9 Sep 2007 08:59:37 EDT
- Once again, I need to ask the knowledgable group a reassembly question. I have probably just ruined the second widshield to cowl gasget on a BJ8. I've used two different sources and still cannot get
- /html/healeys/2007-09/msg00175.html (7,946 bytes)
- 2. Re: [Healeys] Windshield to cowl gasget - BJ8 (score: 1)
- Author: "Bob Yule" <autofarm@cyg.net>
- Date: Sun, 9 Sep 2007 09:16:46 -0400
- Bob, we seem to have done this job more times than I would like. On some of the aftermarket seals, the "T" section is really too thick. You have to make sure the slot is open as far as it should be.
- /html/healeys/2007-09/msg00176.html (9,594 bytes)
- 3. Re: [Healeys] Windshield to cowl gasget - BJ8 (score: 1)
- Author: Warthodson@aol.com
- Date: Sun, 9 Sep 2007 10:21:11 EDT
- I will be tackling this project soon & would appreciate knowing the source for the better profile. Thanks, Gary Hodson In a message dated 9/9/2007 8:00:44 AM Central Daylight Time, HealeyBJ7@aol.com
- /html/healeys/2007-09/msg00179.html (7,043 bytes)
- 4. Re: [Healeys] Windshield to cowl gasget - BJ8 (score: 1)
- Author: <insptwo@msn.com>
- Date: Sun, 09 Sep 2007 12:34:57 -0400
- After going thru the same problems plus, I ordered the gasket thru Healey Surgeons. Used a little liquid Dawn (do not use any liquids with lemon freshner). My wife fed while I slipped it around and
- /html/healeys/2007-09/msg00185.html (9,406 bytes)
- 5. Re: [Healeys] Windshield to cowl gasget - BJ8 (score: 1)
- Author: wericars@aol.com
- Date: Sun, 09 Sep 2007 23:46:40 -0400
- I agree with Bill and not just because his name is Bill ;)? I'll just add that instead of dawn I used a rubber seal preserver/cleaner.? I think it was made by Mothers or Maguires.? It is very oily, b
- /html/healeys/2007-09/msg00190.html (10,357 bytes)
This search system is powered by
Namazu