- 1. [Healeys] release bearings (score: 1)
- Author: Bob Haskell <rchaskell@earthlink.net>
- Date: Sun, 21 Dec 2008 18:01:41 -0500
- Moss lists three different clutch release bearings for the 6 cylinders. 501-022 BN4, BN6 501-020 BN7, BT7, BJ7 to 29F-H4878 501-032 BJ7 from 29F-H4879, BJ8 I have a new bearing - how can I identify
- /html/healeys/2008-12/msg00476.html (7,129 bytes)
- 2. Re: [Healeys] release bearings (score: 1)
- Author: andy pole <ampole@hotmail.com>
- Date: Sun, 21 Dec 2008 23:10:59 +0000
- Dont know if it helps but my spare Borg and Beck (ie original spec) bj8 has got the release bearing stamped 41224 Q178 is roughly 9/32 proud of the housing Andy _____________________________________
- /html/healeys/2008-12/msg00478.html (7,240 bytes)
- 3. Re: [Healeys] release bearings (score: 1)
- Author: Healeyguy <healeyguy@aol.com>
- Date: Sun, 21 Dec 2008 14:25:57 -1000
- The offset (distance) on the release bearing (carbon) from the center of the pivot to the face of the carbon doughnut is different for each one because of the three different clutch cover (pressure
- /html/healeys/2008-12/msg00479.html (8,538 bytes)
- 4. Re: [Healeys] release bearings (score: 1)
- Author: "Skip Saunders" <tfsbj7@mindspring.com>
- Date: Tue, 23 Dec 2008 09:10:07 -0500
- What is the "fix" for these thicker release bearings?.... Does one have to measure them pre-installation and then take them someplace to be ground down? Thanks -skipBJ8 --Original Message-- From: hea
- /html/healeys/2008-12/msg00488.html (7,746 bytes)
- 5. Re: [Healeys] release bearings (score: 1)
- Author: Healeyguy <healeyguy@aol.com>
- Date: Tue, 23 Dec 2008 06:15:45 -1000
- Material can be removed from the bearing but must be flat, reasonably smooth and parallel to the pivot axis. Using the previously mentioned 1 1/4" dimension should work. Flat belt or large disc sande
- /html/healeys/2008-12/msg00489.html (8,124 bytes)
This search system is powered by
Namazu