- 1. [Spridgets] steering column (score: 1)
- Author: "vern@srvinet.com" <vern@srvinet.com>
- Date: Wed, 21 Nov 2007 18:00:26 -0700
- 1959 ah bugeye. In putting the steering column back in I can't find any exact guidance where the outer column fits. It seems there should be something that goes through the hole in the firewall, but
- /html/spridgets/2007-11/msg01024.html (7,186 bytes)
- 2. Re: [Spridgets] steering column (score: 1)
- Author: Frank Clarici <spritenut@comcast.net>
- Date: Wed, 21 Nov 2007 20:42:50 -0500
- Where the column comes thru the firewall, there is an accordian type seal or grommet. You should center the shaft in the hole in the f/wall by adding or removing shims under the aluminum mounting poi
- /html/spridgets/2007-11/msg01031.html (7,598 bytes)
- 3. [Spridgets] Steering column (score: 1)
- Author: Michael Rowe <mdrowe@optonline.net>
- Date: Wed, 09 Apr 2008 19:25:12 -0500
- The top of the outer steering column (??with an angled tightening slot??) is splayed out and loose from jerking the wheel up and down, probably from running into things without a seatbelt. (The botto
- /html/spridgets/2008-04/msg00168.html (7,026 bytes)
- 4. [Spridgets] Steering column (score: 1)
- Author: Michael Rowe <mdrowe@optonline.net>
- Date: Tue, 15 Apr 2008 07:12:43 -0500
- I can now report on what is under the plastic surround on my steering column - a crash box, nothing that comes apart. I can also report that, if you are really stupid about how you cut the plastic, y
- /html/spridgets/2008-04/msg00345.html (7,117 bytes)
This search system is powered by
Namazu