- 1. [TR] TR4 Gas Cap Gasket (score: 1)
- Author: "Glenn Owen" <mgowen55@hotmail.com>
- Date: Tue, 28 Apr 2009 12:14:11 -0400
- My beloved TR3 was wearing me out and I decided to modernize a bit, so I bought a TR6 to complement it. I have toyed with the idea of a Honda S2000, Miata and BMW Z4, but couldn't bring myself to low
- /html/triumphs/2009-04/msg00444.html (7,350 bytes)
- 2. Re: [TR] TR4 Gas Cap Gasket (score: 1)
- Author: "Randall" <tr3driver@ca.rr.com>
- Date: Tue, 28 Apr 2009 12:13:25 -0700
- Unfortunately, that only checks part of the circuit. It won't tell you if the wire to the PDWA switch is disconnected or broken; or if the PDWA switch doesn't work, or the piston is stuck. My light
- /html/triumphs/2009-04/msg00449.html (7,487 bytes)
- 3. Re: [TR] TR4 Gas Cap Gasket (score: 1)
- Author: Geo Hahn <ahwahnee18@gmail.com>
- Date: Tue, 28 Apr 2009 13:16:26 -0700
- How much is it out? Which direction? Any chance the upper A-arms are not assembled properly? For the early type (0 caster) arms, the front arm on the right overlaps the rear arm; but on the left sid
- /html/triumphs/2009-04/msg00450.html (6,989 bytes)
- 4. Re: [TR] TR4 Gas Cap Gasket (score: 1)
- Author: "Wbeech@flash.net" <wbeech@flash.net>
- Date: Tue, 28 Apr 2009 17:47:31 -0600
- A 2.2 degree error shouldn't be too hard to spot. The pivots are something like 10" apart, which means you are looking for one pivot point to be out of position by over 1/3 inch (.38" if they are 10
- /html/triumphs/2009-04/msg00452.html (8,858 bytes)
- 5. Re: [TR] TR4 Gas Cap Gasket (score: 1)
- Author: "Glenn Owen" <mgowen55@hotmail.com>
- Date: Tue, 28 Apr 2009 20:15:30 -0400
- Are you sure about what it won't tell you? Or am I misinterpreting what you said? I don't have a wiring diagram in front of me at the moment but I'm quite certain I think I remember that on the GT6 i
- /html/triumphs/2009-04/msg00453.html (7,414 bytes)
This search system is powered by
Namazu