- 1. [oletrucks] No spark! (score: 1)
- Author: Leah Olsen <javanut@win.bright.net>
- Date: Mon, 07 Aug 2000 23:46:02 -0500
- Hello! My husband bought a 6v coil today. There is still no spark. What could be wrong? We have no spark coming out of the coil. We tried touching the wire that comes from the negative side of the co
- /html/oletrucks/2000-08/msg00254.html (7,212 bytes)
- 2. Re: [oletrucks] No spark! (score: 1)
- Author: "joe" <chevy1@jps.net>
- Date: Mon, 7 Aug 2000 23:15:14 -0700
- Here's what I'd do to check for spark: 1. Turn the key on and check for juice at the coil. 2. Check for juice at the points 3. If you have juice at the points then, a) Rotate the engine either buy ro
- /html/oletrucks/2000-08/msg00256.html (8,606 bytes)
- 3. Re: [oletrucks] No spark! (score: 1)
- Author: Grant Galbraith <trks@javanet.com>
- Date: Tue, 08 Aug 2000 02:32:47 -0400
- Check that you have voltage a positive side of your new coil. If you do and still have no spark at coil I would suspect points and/or condenser, assuming that the wire is good between the distributor
- /html/oletrucks/2000-08/msg00258.html (7,641 bytes)
- 4. Re: [oletrucks] No spark! (score: 1)
- Author: Lewis Osborn <losborn@teleport.com>
- Date: Tue, 8 Aug 2000 12:42:50 -0700
- If you haven't replaced the condenser yet, do it now. I've seen them shorted more times than I can remember. Next, make sure that you have voltage on the ignition side of the coil, then disconnect th
- /html/oletrucks/2000-08/msg00265.html (8,074 bytes)
- 5. Re: [oletrucks] No spark! (score: 1)
- Author: B&A Kettunen <bekett@uslink.net>
- Date: Tue, 8 Aug 2000 22:48:10 -0500 (CDT)
- To make a spark, there has to be the following: 1. Positive voltage at the primary lead to the coil from the ignition switch 2. A clean path from the coil to the points. 3. Points and condenser that
- /html/oletrucks/2000-08/msg00280.html (9,507 bytes)
This search system is powered by
Namazu