- 1. [oletrucks] Oil Gauge for 261 (score: 1)
- Author: "Deve Krehbiel" <dkrehbiel@kscable.com>
- Date: Fri, 22 Dec 2000 21:58:36 -0600
- The PO just crimped the oil gauge line so it wouldnt ruin the 30 pound gauge when he installed the 261. I am assuming I need a 60 pound gauge and of course now a new oil line. Anyone know where I can
- /html/oletrucks/2000-12/msg00615.html (7,266 bytes)
- 2. Re: [oletrucks] Oil Gauge for 261 (score: 1)
- Author: "W&D" <haist2@home.com>
- Date: Thu, 21 Dec 2000 21:25:18 -0800
- Most guys I talked to on this subject just left the 30# gauge and let it peg out with the higher pressure engine. It's true you don't know exactly what the pressure is above 30, but you'll know if th
- /html/oletrucks/2000-12/msg00617.html (8,062 bytes)
- 3. Re: [oletrucks] Oil Gauge for 261 (score: 1)
- Author: "Barrett Revis" <snappydog@jackass.net>
- Date: Fri, 22 Dec 2000 00:38:08 -0800
- The GMC AD's used full pressure engines so the gauges from those trucks are 60lb. I found one in a used GMC gauge cluster at a swap meet. The temp gauge was cut and the fuel gauge was fryed, but I sn
- /html/oletrucks/2000-12/msg00619.html (7,531 bytes)
- 4. RE: [oletrucks] Oil Gauge for 261 (score: 1)
- Author: "Hanlon, Bill" <Bill.Hanlon@COMPAQ.com>
- Date: Fri, 22 Dec 2000 08:56:40 -0600
- United Speedometer (ain't cheap, but does really nice work) have a picture of an AD instrument set with an 80PSI gauge. Check it out at http://www.speedometershop.com/enc-pag.htm Most guys I talked t
- /html/oletrucks/2000-12/msg00623.html (8,683 bytes)
- 5. Re: [oletrucks] Oil Gauge for 261 (score: 1)
- Author: "Allen Jones" <jonesal@u.washington.edu>
- Date: Fri, 22 Dec 2000 07:44:18 -0800
- No need to. Get a GMC gauge, as they all go to 60 psi. I think I pulled mine from a '52 big truck to poke in my '50 Chev. Now I really know what my oil pressure is. I even believe that the vendors ma
- /html/oletrucks/2000-12/msg00624.html (9,089 bytes)
This search system is powered by
Namazu