Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Aluminum\s+front\s+hubs\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Aluminum\s+front\s+hubs\s*$/: 19 ]

Total 19 documents matching your query.

1. Aluminum front hubs (score: 1): Author: "Jack W. Drews" <vinttr4@geneseo.net>; Date: Thu, 13 Oct 2005 19:25:26 -0500; I'm going to try to persuade Bob Southwick to make another run of aluminum front hubs. To make my pitch more effective, if you are contemplating trying to get a set of these, please email me back so; /html/fot/2005-10/msg00173.html (7,466 bytes)
2. RE: Aluminum front hubs (score: 1): Author: Bill Babcock <BillB@bnj.com>; Date: Thu, 13 Oct 2005 18:51:37 -0700; I'm definately loosing my marbles. Didn't Mark Weathers do aluminum hubs along with the modified stub axles? I'd go for another set of those, whoever makes them. I'm going to try to persuade Bob Sout; /html/fot/2005-10/msg00177.html (7,826 bytes)
3. Re: Aluminum front hubs (score: 1): Author: GRMTim@aol.com; Date: Fri, 14 Oct 2005 07:48:08 EDT; JK Jackson got me some of these, or something similar and we didn't use them, becuase JK didn't like them. Anybody else had problems, or are we missing something? Tim Suddard; /html/fot/2005-10/msg00181.html (8,000 bytes)
4. Re: Aluminum front hubs (score: 1): Author: Chuck Arnold <chuck.arnold@oracle.com>; Date: Fri, 14 Oct 2005 08:00:29 -0700; I have the Southwick hubs and the Weathers axels -- work just fine together. Got three by one half inch studs which was probably overkill [2.5 would have been better.] chuck; /html/fot/2005-10/msg00186.html (11,391 bytes)
5. RE: Aluminum front hubs (score: 1): Author: Bill Babcock <BillB@bnj.com>; Date: Fri, 14 Oct 2005 08:24:07 -0700; I like them a lot--they don't break. Also love the uprated axles--the pucks don't get pushed back in your brakes. Having that much flex in a front stub is nervewracking to begin with. JK Jackson got; /html/fot/2005-10/msg00187.html (8,995 bytes)
6. RE: Aluminum front hubs (score: 1): Author: "Mark York" <m-syork@comcast.net>; Date: Fri, 14 Oct 2005 09:01:50 -0700; The first time it happened my suit was nearly soiled. After a while I got used to stabbing the brakes with my left foot while my right foot was buried on the go pedal down the straight. At the end o; /html/fot/2005-10/msg00188.html (9,905 bytes)
7. Re: Aluminum front hubs (score: 1): Author: "Charly Mitchel" <charly@mitchelplumbing.com>; Date: Fri, 14 Oct 2005 10:33:54 -0700; Yes, but are they all compatible or interchangeable? I was told they weren't or did I misunderstand/ Charly TR6 #44 -- Original Message -- From: "Mark York" <m-syork@comcast.net> To: "'Bill Babcock'"; /html/fot/2005-10/msg00189.html (10,864 bytes)
8. RE: Aluminum front hubs (score: 1): Author: "Mark York" <m-syork@comcast.net>; Date: Fri, 14 Oct 2005 10:53:13 -0700; BFE offers two axle strengthening kits; one works with stock hubs and the other with the alloy (Southwick) version Mark Yes, but are they all compatible or interchangeable? I was told they weren't o; /html/fot/2005-10/msg00190.html (11,205 bytes)
9. Re: Aluminum front hubs (score: 1): Author: "Charly Mitchel" <charly@mitchelplumbing.com>; Date: Fri, 14 Oct 2005 12:49:53 -0700; So, if I order the aluminum hubs from Jack, I'd need to get different spacers for my uprated axels from Mark. Right Charly TR6 #44 -- Original Message -- From: <CHUCK.ARNOLD@ORACLE.COM> To: <fot@auto; /html/fot/2005-10/msg00191.html (8,902 bytes)
10. Re: Aluminum front hubs (score: 1): Author: Tony Drews <tony@tonydrews.com>; Date: Fri, 14 Oct 2005 18:39:07 -0500; Exactly right. The difference between the two uprated axle kits is in the spacer. Since the (vastly superior to stock) aluminum hubs use vastly superior (and wider) bearings, the spacer is a differen; /html/fot/2005-10/msg00196.html (10,124 bytes)
11. Re: Aluminum front hubs (score: 1): Author: "BOB KRAMER" <rkramer3@austin.rr.com>; Date: Fri, 14 Oct 2005 18:40:54 -0500; Has anyone else had trouble with the upgrade kit D washers spinning during tightening and marring the threads on the axle? Bob Kramer rkramer3@austin.rr.com -- Original Message -- From: "Mark York" <; /html/fot/2005-10/msg00197.html (11,899 bytes)
12. Re: Aluminum front hubs (score: 1): Author: "Jack W. Drews" <vinttr4@geneseo.net>; Date: Fri, 14 Oct 2005 19:31:56 -0500; Yes, that's right.; /html/fot/2005-10/msg00198.html (8,861 bytes)
13. RE: Aluminum front hubs (score: 1): Author: Bill Babcock <BillB@bnj.com>; Date: Fri, 14 Oct 2005 20:43:01 -0700; I did, so I ditched them. I'd just as soon not have D washers at all, and in fact if I get another set made they won't have the flat ground. Has anyone else had trouble with the upgrade kit D washers; /html/fot/2005-10/msg00199.html (12,060 bytes)
14. RE: Aluminum front hubs (score: 1): Author: "Mike Munson" <fasttrs@mindspring.com>; Date: Fri, 14 Oct 2005 23:54:42 -0400; I did the week before the Mitty. I called Mark Weathers up on Monday and had a new axle and thicker D washer by Thursday. The thicker D washers that were supplied with the later kits are the remedy.; /html/fot/2005-10/msg00200.html (12,130 bytes)
15. Re: Aluminum front hubs (score: 1): Author: "MARK J WEATHERS" <markjwea@msn.com>; Date: Sat, 15 Oct 2005 12:28:54 +0000; Charly, Ken Gillanders at BFE is the distributor for both kits and spare parts, if he doesn't have the spacers I can ship him some. A new run of axles is planned for December, Ken has about 15 orders; /html/fot/2005-10/msg00202.html (9,354 bytes)
16. RE: Aluminum front hubs (score: 1): Author: CHUCK.ARNOLD@oracle.com; Date: Fri, 14 Oct 2005 18:23:22 +0000 (GMT); The ones for the Southwick hub are the "Mark Weathers" design. MArk made the set I have. He did not want to be in the sales business, So Ken sells them. Not sure what the supply status is these days.; /html/fot/2005-10/msg00218.html (8,306 bytes)
17. Aluminum front hubs (score: 1): Author: Chuck Arnold <chuck.arnold@oracle.com>; Date: Wed, 02 Jul 2003 20:53:43 -0700; Checked with Southwick Machine today on when the hubs I signed up for about three months ago might arrive. They ar a little like Jim Swarthout's rocker cover and roller rockers -- a critical mass is; /html/fot/2003-07/msg00026.html (7,237 bytes)
18. Re: Aluminum front hubs (score: 1): Author: "jaboruch" <jaboruch@adelphia.net>; Date: Mon, 7 Jul 2003 20:19:42 -0400; I also have been waiting for a set from Southworth. Joe(B) -- Original Message -- From: "Chuck Arnold" <chuck.arnold@oracle.com> To: "FOT" <fot@autox.team.net>; "6pack digest" <6pack-digest@autox.tea; /html/fot/2003-07/msg00087.html (7,846 bytes)
19. Aluminum Front Hubs (score: 1): Author: "jaboruch" <jaboruch@netzero.net>; Date: Mon, 30 Jul 2001 21:50:25 -0400; I called Southwick today and they sold all of the hubs that they had made, last week. He took my name and is starting a list of people interested in them, so that he can make them in a batch, rather; /html/fot/2001-07/msg00280.html (6,621 bytes)

Current List: 1 - 19
Page: [1]