Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Cam\s+fixed\?\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Cam\s+fixed\?\s*$/: 6 ]

Total 6 documents matching your query.

1. Re: Cam fixed? (score: 1): Author: DaCRANEz@aol.com; Date: Wed, 25 May 2005 23:41:56 EDT; I meant to post you last week but got busy. I did get the crank and cam timing fixed. It took one tooth on the cam sprocket. Changed the timing at the crank 16 degrees. Had to move the dizzy gear on; /html/6pack/2005-05/msg00337.html (7,797 bytes)
2. RE: Cam fixed? (score: 1): Author: "Shawn J. Loseke" <sloseke@holly.colostate.edu>; Date: Wed, 25 May 2005 22:07:48 -0600; Mike, Out of curiosity, what idle speed are you trying to run at? If you have got a lot of "lope" going on you probably need to adjust your idle speed. My GP3 cam won't idle smoothly below 1000 rpm a; /html/6pack/2005-05/msg00339.html (7,247 bytes)
3. Cam fixed? (score: 1): Author: DaCRANEz@aol.com; Date: Thu, 26 May 2005 15:54:37 EDT; Idle is set at 1000 rpm. I will up it a bit. The miss is very even and of course amplified by the under car sound system. Going to replace the new spark plugs with newer plugs and see if that makes; /html/6pack/2005-05/msg00343.html (6,703 bytes)
4. Cam fixed? (score: 1): Author: DaCRANEz@aol.com; Date: Thu, 26 May 2005 16:14:05 EDT; Since rebuilding the engine about this time last year I have had issues with the idle. Recently Vance had a post about how to verify that the cam timing was correct. I did the check and found that 1; /html/6pack/2005-05/msg00344.html (7,448 bytes)
5. RE: Cam fixed? (score: 1): Author: "Navarrette, Vance" <vance.navarrette@intel.com>; Date: Thu, 26 May 2005 14:02:21 -0700; You have really gone crazy with the cam timing. The 1.65 rockers means that you have in effect added even more valve timing and more overlap. This takes an autocross cam and moves it up into the bot; /html/6pack/2005-05/msg00345.html (10,081 bytes)
6. Re: Cam fixed? (score: 1): Author: "Jerry C Shaw" <slowtoaccept@yahoo.com>; Date: Fri, 27 May 2005 20:26:06 -0400; I got into this thread late, and don't know what cam you have chosen. Mine is kind of a long story, and is prompted by my refusal to proceed to the next step of my engine rebuild until I fully under; /html/6pack/2005-05/msg00362.html (8,981 bytes)

Current List: 1 - 6
Page: [1]