- 1. Flywheel bolts (score: 1)
- Author: Larry Hoy <larryhoy@cwix.com>
- Date: Sun, 15 Nov 1998 16:35:59 -0700
- Any suggestions on how to remove the flywheel bolts on a B engine? The bolts are very flat, and whoever removed them in the past must have barely gotten them out and now they are basically smooth. I
- /html/mgs/1998-11/msg00809.html (6,901 bytes)
- 2. Re: Flywheel bolts (score: 1)
- Author: "Mike Hartwig" <mhartwig@cbu.edu>
- Date: Sun, 15 Nov 1998 19:54:37 -0600
- The bolts gotten them then remove Larry, go get yerself a welder and weld on a set of 1/2" square bar stock to the tops of the flywheel bolts. Then go get your favorite open-end wrench and go to tow
- /html/mgs/1998-11/msg00815.html (7,173 bytes)
- 3. Re: Flywheel bolts (score: 1)
- Author: Susan and John Roper <vscjohn@iamerica.net>
- Date: Sun, 15 Nov 1998 20:15:35 -0600
- Larry, drill a hole in the end of a piece of steel scrap, then weld to the the head of the bolt. Should give you a handle that will let you break the bolt loose. John
- /html/mgs/1998-11/msg00817.html (7,293 bytes)
- 4. RE: Flywheel bolts (score: 1)
- Author: Larry Hoy <larryhoy@cwix.com>
- Date: Sun, 15 Nov 1998 22:43:18 -0700
- Warning, this is a bit long. Here's the suggestions I received, thank you all for your help. At the end of the suggestions I have outlined what I did. Yes the bolts are off. 1 Same thing on two motor
- /html/mgs/1998-11/msg00825.html (9,857 bytes)
- 5. flywheel bolts (score: 1)
- Author: WSpohn4 <WSpohn4@aol.com>
- Date: Fri, 20 Mar 1998 16:11:08 EST
- The flywheel bolts are standard Chevy items, nothing fancy. Give ARP a call and find out how cheap they really are. I think it's about $15 for the set. It's another case of "rare British parts that
- /html/mgs/1998-03/msg01469.html (6,472 bytes)
- 6. flywheel bolts (score: 1)
- Author: "Joe R. Koster" <jkoster@ncpi.com>
- Date: Fri, 20 Mar 1998 15:19:52 -0600
- Hello Everyone! I own a 71 MG Midgit and this weekend I'm going to replace the clutch slave cylinder and the M/C. I was wondering if there is any helpful hints in replaceing these items and the best
- /html/mgs/1998-03/msg01470.html (6,808 bytes)
- 7. Re: flywheel bolts (score: 1)
- Author: JustBrits <JustBrits@aol.com>
- Date: Fri, 20 Mar 1998 19:59:51 EST
- CAREFULL - everybody: Bolts are UNF NOT SAE!! Cheers.......... Ed
- /html/mgs/1998-03/msg01481.html (6,321 bytes)
This search system is powered by
Namazu