- 1. Fulcrum pins won't budge (score: 1)
- Author: HealeyBN7@aol.com
- Date: Mon, 6 Sep 2004 17:08:13 EDT
- Help. The inner fulcrum pins on the lower wishbone arms on my BN7 will not move. I have, after much work, managed to remove the split pins and castle nuts. The fulcrum pins however are not even begin
- /html/healeys/2004-09/msg00121.html (7,163 bytes)
- 2. Fw: Fulcrum pins won't budge (score: 1)
- Author: "Rich C" <richchrysler@quickclic.net>
- Date: Mon, 6 Sep 2004 18:07:16 -0400
- the a them worked dumb archives Check out the new British Cars Forum: http://www.team.net/the-local/tiki-view_forum.php?forumId=8
- /html/healeys/2004-09/msg00124.html (8,772 bytes)
- 3. Re: Fulcrum pins won't budge (score: 1)
- Author: "davidwjones" <davidwjones@cox.net>
- Date: Mon, 6 Sep 2004 18:09:07 -0400
- I don't know how long yours have been in, but they can be stubborn to remove. When I last removed mine, it seems to me that I remember having to use a hand-maul (hand sledge) to drive the fulcrum pi
- /html/healeys/2004-09/msg00125.html (8,259 bytes)
- 4. Re: Fulcrum pins won't budge (score: 1)
- Author: "Bob Spidell" <bspidell@pacbell.net>
- Date: Mon, 6 Sep 2004 15:39:19 -0700
- If all else fails, you can sharpen the tips of a tie rod end separator--aka a "pickle fork"--and use it to wedge the pin out (with hammerly persuasion). If you're careful, you'll only bend the flat
- /html/healeys/2004-09/msg00128.html (8,201 bytes)
- 5. Fulcrum pins won't budge (score: 1)
- Author: joe mulqueen <joemulqueen@yahoo.com>
- Date: Mon, 6 Sep 2004 21:23:18 -0700 (PDT)
- Hey Dave, I used a variable speed "sawzall" to cut out a few of my inner pivots. It can be done with no scarring to surrounding metal if you're methodical. I also used the same tool for the rear leaf
- /html/healeys/2004-09/msg00136.html (7,782 bytes)
This search system is powered by
Namazu