- 1. How to test a condenser (score: 1)
- Author: Barney Gaylord <barneymg@ntsource.com>
- Date: Wed, 09 Dec 1998 21:25:28
- Oh ye, wisdom of the list, A new experience every day, and now for the first time in my life I finally had a condenser fail on me. The last one lasted several years and 100,000 miles without a proble
- /html/mgs/1998-12/msg00576.html (8,463 bytes)
- 2. Re: How to test a condenser (score: 1)
- Author: "Harlan Jillson" <hjillson@argolink.net>
- Date: Thu, 10 Dec 1998 05:24:22 -0600
- The real way to check it is with a capacitance meter, which will usually tell you the capacitance at 1 K hertz, and maybe at a higher frequency. You can do a check with an ohmmeter to tell if its to
- /html/mgs/1998-12/msg00588.html (10,242 bytes)
- 3. Re: How to test a condenser (score: 1)
- Author: ccrobins <ccrobins@ktc.com>
- Date: Thu, 10 Dec 1998 06:39:56 -0600
- Hi Barney, If you test a good condensor with an analogue ohmmeter, you'll see the needle deflect towards zero and then slowly rise until it settles at infinity. This is because the condensor is charg
- /html/mgs/1998-12/msg00594.html (7,702 bytes)
- 4. How to test a condenser (score: 1)
- Author: Simon Matthews <simon_matthews@avanticorp.com>
- Date: Thu, 10 Dec 1998 10:54:48 -0800
- I suspect that this is very difficult with normal test equipment, because what you are most likely looking for is breakdown at high voltage. So, you need a controlled DC power supply capable of supp
- /html/mgs/1998-12/msg00605.html (7,963 bytes)
- 5. How to test a condenser (score: 1)
- Author: Simon Matthews <simon_matthews@avanticorp.com>
- Date: Thu, 10 Dec 1998 11:03:26 -0800
- So, you need a controlled DC power supply capable of supplying up to about 3-400 volts and capable of withstanding a short across its terminals. On second thoughts, the requirement to withstand a sh
- /html/mgs/1998-12/msg00606.html (8,033 bytes)
- 6. Re: How to test a condenser (score: 1)
- Author: "Paul Hunt" <paul.hunt1@virgin.net>
- Date: Thu, 10 Dec 1998 19:09:17 -0000
- As a quick "on the car" check compare the distance the spark will jump using the following two methods: 1. Disconnect the contact breaker wire from the coil and tap a flying ground lead on and off th
- /html/mgs/1998-12/msg00612.html (9,741 bytes)
- 7. Re: How to test a condenser (score: 1)
- Author: mgbob@juno.com (Bob Howard)
- Date: Thu, 10 Dec 1998 18:35:53 EST
- Two years ago I had a condensor die of something--don't know why, except that it was one of those sorry Lucas units that lasted only from 11/52 to 6/96, and then they wouldn't honor the warranty. I
- /html/mgs/1998-12/msg00633.html (9,865 bytes)
- 8. Re: How to test a condenser (score: 1)
- Author: "image" <image77@ibm.net>
- Date: Thu, 10 Dec 1998 23:34:31 -0700
- 3-400 volts? If I'm not totally mistaken, the condenser only sees 12 - 14 max. It seems to be there to prevent any interference from messing with the ignition system. I never really thought about it
- /html/mgs/1998-12/msg00661.html (7,395 bytes)
- 9. Re: How to test a condenser (score: 1)
- Author: Barney Gaylord <barneymg@ntsource.com>
- Date: Fri, 11 Dec 1998 14:40:28
- max. It seems to be there to prevent any interference from messing with the ignition system. I never really thought about it in depth, can anyone correct me? At the risk of opening that strange discu
- /html/mgs/1998-12/msg00687.html (7,804 bytes)
This search system is powered by
Namazu